• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Quantitative Estimates of Non-Darcy Groundwater Flow Properties and Normalized Hydraulic Aperture through Discrete Open Rough-Walled Joints

    Thumbnail
    View/Open
    %28ASCE%29GM.1943-5622.0001228.pdf (2.973Mb)
    Date
    2018
    Author
    Qian Xin;Xia Caichu;Gui Yang
    Metadata
    Show full item record
    Abstract
    This study aimed to understand the behavior of non-Darcy water fluid flow through a single joint in rock. Water flow tests through three splitting mated granite joints with natural characteristics were conducted beyond the range of previously tested conditions using the designed experimental apparatus. This study expands on previous work as follows: (1) A rough rock joint with natural characteristics was adopted rather than a smooth, parallel plate model; (2) the aperture and surface roughness could be precisely controlled; and (3) the maximum pressure gradient could reach 25. A single fracture was formed by two mated rough joint surfaces with variable apertures ranging from .5 to 2 mm (constant opening between upper and lower parallel surfaces). The three-dimensional (3D) surface morphology of the rock joints was obtained from a noncontact, 3D stereotopometric measurement instrument before the rock joints were tested. The roughness parameters of the rock joints were then calculated by self-programmed software. For each specimen, flow tests were conducted for four mechanical apertures and eight pressure gradients (maximum of 25). A nonlinear relationship between hydraulic gradient and water flow velocity was demonstrated and fitted well with Izbash’s law. The effect of joint roughness and aperture on the coefficient λ and power exponent n of Izbash’s law was further explored in this experiment (i.e., to maintain the same joint roughness coefficient or aperture). Finally, a new relationship between aperture ratio (hydraulic aperture to mechanical aperture) and Reynolds number is proposed based on the laboratory observations. These findings may be beneficial for the design of model experiments and computational studies on coupled shear-flow properties through real rock joints or highly jointed rocks.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4248910
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV