Show simple item record

dc.contributor.authorRoy Kshama;Hawlader Bipul;Kenny Shawn;Moore Ian
dc.date.accessioned2019-02-26T07:43:08Z
dc.date.available2019-02-26T07:43:08Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001226.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248907
dc.description.abstractThis study conducted finite-element (FE) modeling of uplift resistance from dense backfill sand. The prepeak hardening, postpeak softening, density, and confining-pressure-dependent soil behavior were implemented in FE analysis to simulate the progressive development of shear bands. The location of the shear bands was identified from soil failure mechanisms for a range of burial depths. For shallow buried pipelines, the inclination of the slip planes to the vertical was found to be approximately equal to the maximum dilation angle when the peak uplift resistance was mobilized and then decreased with an upward movement, resulting in a postpeak reduction of uplift resistance. For deeper conditions, in addition to two inclined slip planes, logarithmic spiral-type shear bands formed above the pipe. Based on mobilized shear strength parameters and inclination of slip planes, a method to calculate the peak and postpeak uplift resistances, using an equivalent angle of internal friction, is presented.
dc.publisherAmerican Society of Civil Engineers
dc.titleUplift Failure Mechanisms of Pipes Buried in Dense Sand
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue8
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001226
dc.page4018087
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record