Show simple item record

dc.contributor.authorXu Jing-shu;Yang Xiao-li
dc.date.accessioned2019-02-26T07:42:42Z
dc.date.available2019-02-26T07:42:42Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001177.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248868
dc.description.abstractReinforcements are essential for improvement of slope stability. In most slope stability analyses, the soil is regarded as homogeneous, whereas it is in fact nonhomogeneous in many cases. Based on the limit-analysis method, in this study, a three-dimensional seismic and static stability calculation was performed for a slope in nonhomogeneous soil. The analytical expressions of the required strength of reinforcement and stability factor under three categories of reinforcement patterns were derived. The effects of reinforcement distribution patterns, reinforcement strength, slope angle, seismic force, and soil nonhomogeneity and anisotropy on slope stability were investigated. It was found that the downwardly strong triangular distribution pattern (DTD) gives rise to the best reinforcement effect on slope stability, then the uniform distribution pattern (UD), and finally the upwardly strong triangular distribution pattern (UTD). An increase in the angle and width of the slope and seismic forces results in a stability decrease of the reinforced slope, whereas soil nonhomogeneity and anisotropy have positive influences on slope stability. Finally, some design tables are presented for design purposes.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic and Static Stability Analysis for 3D Reinforced Slope in Nonhomogeneous and Anisotropic Soils
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001177
dc.page4018065
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record