Show simple item record

dc.contributor.authorHao Ruiqing;Cao Ping;Chen Yu;Jin Jin;Wang Hua;Fan Xiang
dc.date.accessioned2019-02-26T07:42:41Z
dc.date.available2019-02-26T07:42:41Z
dc.date.issued2018
dc.identifier.other%28ASCE%29GM.1943-5622.0001176.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248867
dc.description.abstractA large number of discontinuities is frequently encountered in geotechnical engineering that significantly influences the stability of engineering. Therefore, it is important to investigate the mechanical properties and failure modes of a flawed rock mass. For this study, a series of uniaxial compression experiments was carried out on yellow sandstone samples containing a single flaw and mechanical analyses were conducted accordingly. The experimental results suggested that hydraulic pressure can induce a relatively high peak axial strain in the samples. However, the hydraulic pressure had a different influence on the uniaxial compressive strength of samples with flaws at different inclination angles. Moreover, three new types of crack were observed: One was a tensile crack, and the others were lateral cracks that emerged in samples under hydraulic pressure. On the basis of the analytical method, the calculated results were verified by the experimental results. The findings indicated that the crack initiation position moved toward the flaw tip and the crack initiation angles were reduced when the hydraulic pressure acted on the flaw surface. Furthermore, the hydraulic pressure induced greater initiation strength and strain in the samples, except for the samples with inclination flaws greater than 75°.
dc.publisherAmerican Society of Civil Engineers
dc.titleMechanical and Propagating Behaviors of Single-Flawed Rock Samples with Hydraulic Pressure and Uniaxial Compression Conditions
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001176
dc.page4018078
dc.treeInternational Journal of Geomechanics:;2018:;Volume ( 018 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record