Show simple item record

dc.contributor.authorDerakhshan Hossein;Lucas Wade;Visintin Phillip;Griffith Michael C.
dc.date.accessioned2019-02-26T07:42:33Z
dc.date.available2019-02-26T07:42:33Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0001987.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248853
dc.description.abstractAn experimental campaign consisting of nine pressure-controlled quasi-static airbag tests on unreinforced masonry (URM) walls and accompanying material testing was completed to investigate methods for seismic retrofit of out-of-plane loaded cavity walls. Three control walls were tested to serve as a baseline for wall strength comparisons: (1) a double-leaf unstrengthened cavity wall; (2) a cavity wall with improved cavity connections; and (3) a single-leaf wall strengthened using a near-surface-mounted (NSM) fiber-reinforced polymer (FRP) strip. The experimental program was concluded by six tests that were conducted on walls strengthened using a NSM FRP strip and having cavity connections in the form of either standard bent metal ties, proprietary helical anchors, or industrial foam. The tests were designed to measure the ability of the different cavity connections to maintain the cavity gap until a ductile wall failure mechanism forms by FRP debonding. Three of the walls were previously damaged by testing in either unstrengthened or FRP-strengthened conditions. These tests were intended to study FRP retrofit effectiveness of precracked walls or the relative ability of different types of cavity connections to resist forces until a global FRP debonding occurs. For each of the six cavity connection configurations, the FRP-strengthening technique was shown to significantly improve the wall strength. The minimum strength increase was 282% compared with that of the control cavity wall. The compiled data are presented followed by general discussions on the design of seismic retrofit for cavity walls.
dc.publisherAmerican Society of Civil Engineers
dc.titleLaboratory Testing of Strengthened Cavity Unreinforced Masonry Walls
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001987
dc.page4018005
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record