Show simple item record

dc.contributor.authorQu Bing;Liu Xiaofang;Hou Hetao;Qiu Canxing;Hu Dazhu
dc.date.accessioned2019-02-26T07:42:19Z
dc.date.available2019-02-26T07:42:19Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0001985.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248831
dc.description.abstractThis research focuses on a new type of buckling-restrained brace (BRB) with replaceable steel angle fuses. The proposed BRB offers ease of postearthquake examination of fuse damage, convenient and prompt replacement of damaged fuses, and reuse of the buckling restraining elements. To investigate seismic behavior of the proposed BRB, seven brace specimens are tested. The test parameters varied in these specimens include fuse design, fuse material, debonding material, and loading protocol. Test results show that the proposed BRB can exhibit stable hysteretic behavior up to fairly high fuse strain levels. Failure modes of the specimens are found to be ruptures of the angle fuses, as expected. The compression strength adjustment factors and the cumulative plastic deformations of the specimens are found to satisfy the requirements specified by the current U.S. seismic design provisions for structural steel buildings. Moreover, the authors demonstrate that specimens repaired through fuse replacement remain satisfactory in following tests. Furthermore, rupture failures of the proposed BRB can be captured by the modified Park–Ang damage measure.
dc.publisherAmerican Society of Civil Engineers
dc.titleTesting of Buckling-Restrained Braces with Replaceable Steel Angle Fuses
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001985
dc.page4018001
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record