Show simple item record

dc.contributor.authorYang Ou;Zhang Bai;Yan Guirong;Chen Jun
dc.date.accessioned2019-02-26T07:35:18Z
dc.date.available2019-02-26T07:35:18Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002217.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248091
dc.description.abstractBond-slip characteristics of slightly corroded (less than 2% mass loss) reinforcing steel bars embedded in concrete were investigated with pull-out tests conducted after exposure to high temperature and subsequent cooling. Twenty-five scenarios consisting of five corrosion levels (.%, .5%, 1.%, 1.5%, and 2.% corrosion loss) and five exposed temperatures (2°C, 2°C, 4°C, 6°C, and 8°C) were tested. The results indicate that the slight corrosion of the reinforcement not only affects the bond performance of concrete and steel bars but also influences their reaction to elevated temperature before the exposure temperature exceeds 4°C. The effect of slight corrosion on bond-mechanics behavior was eliminated by the dramatic decrease in concrete strength and significantly different thermal expansion between concrete and steel as the exposure temperature reached 6°C.
dc.publisherAmerican Society of Civil Engineers
dc.titleBond Performance between Slightly Corroded Steel Bar and Concrete after Exposure to High Temperature
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002217
dc.page4018209
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record