Show simple item record

dc.contributor.authorPan Wen-Hao;Eatherton Matthew R.;Nie Xin;Fan Jian-Sheng
dc.date.accessioned2019-02-26T07:34:54Z
dc.date.available2019-02-26T07:34:54Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002162.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248043
dc.description.abstractThe conventional restraining ratio approach is not suitable for a straightforward design of the pre-tensioned cable-stayed buckling-restrained brace (PCS-BRB) because of its complicated buckling-restrained system. This study uses an adequate bracing approach to establish a more rigorous design procedure for the PCS-BRB by analyzing and designing the PCS-BRB as a braced system; a simplified midspan braced column with translational and rotational springs. Based on the results from an elastic buckling analysis, the influences of the midspan translational and rotational spring stiffnesses on the buckling axial loads associated with symmetric and antisymmetric buckling modes, respectively, are discussed. In a second-order analysis, the solution for the column differential equation of equilibrium is derived considering both symmetric and antisymmetric initial imperfections. The inverse interrelationship between the bracing strength and stiffness requirements is investigated. Then, using the results from these analyses for the midspan braced column, the adequate bracing approach is followed for the design of the PCS-BRB. The strength limits of the cable-stayed system are formulated for its effectiveness, and its adequate stiffness requirements are determined based on examination of these strength limits. A detailed design procedure and an elementary design example are presented.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign of Pre-Tensioned Cable-Stayed Buckling-Restrained Braces Considering Interrelationship between Bracing Strength and Stiffness Requirements
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002162
dc.page4018169
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record