Show simple item record

dc.contributor.authorTang Yajun;Tong Genshu;Zhang Lei
dc.date.accessioned2019-02-26T07:34:48Z
dc.date.available2019-02-26T07:34:48Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002154.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248034
dc.description.abstractThe buckling of parallel purlins/girts is presented with attention paid to the effectiveness of the sag rods. Buckling of a simply supported purlin/girt with two sag rods at the one-third point along the span is studied. The lateral displacement of the upper flange is prohibited and distributed torsional restraints are provided to the purlin/girt because the upper flange of the purlin/girt is assumed to be screw-fastened to the roof/wall sheeting. Closed-form solutions are found, and the buckling moment is explicitly given in which the torsional restraints and the stiffness of sag rod have been included. The demand on sag rod stiffness to make the purlin buckle into three waves is observed. Comparing with the same purlin system but with one sag rod at midspan, the demand on the sag rod stiffness increases significantly in this system if purlins are both required to buckle within the sag rod to support or sag rod-to-sag rod distance. Parallel purlins/girts interconnected by sag rods are also investigated with the local bending of the purlin/girt web at sag rod points, and the zigzag of the sag rods in adjacent bays are taken into consideration. It is found that parallel purlins/girts can be studied the same way as a single purlin/girt but with a reduced sag rod stiffness, which is also presented and discussed. Comparisons and formulas show that the number of purlins/girts, the position of the sag rod connecting points along the height of the web, and the zigzag offset distance of adjacent sag rods reduce the equivalent stiffness of the sag rods dramatically.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffectiveness of Sag Rods as Lateral Supports for Parallel Purlins and Girts
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002154
dc.page4018151
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record