Show simple item record

dc.contributor.authorJiansinlapadamrong Chatchai;Price Brandon;Chao Shih-Ho
dc.date.accessioned2019-02-26T07:34:30Z
dc.date.available2019-02-26T07:34:30Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002125.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4248003
dc.description.abstractCurrent standards require that, for moment-resisting frames, the strength degradation of a beam–column connection should not reduce flexural strength measured at a drift angle of .4 rad to less than 8% of the nominal flexural strength, Mp. This requirement is generally sufficient for special moment-resisting frames (SMFs) to prevent collapse due to instability. However, in other seismic force-resisting systems (SFRSs), such as special truss moment frames (STMFs), the chord members within the predefined yielding panel, referred to as a special segment, experience a much larger member rotation. The rotational capacity and ductility of a steel member are controlled by the interaction of three instabilities: flange local buckling (FLB), web local buckling (WLB), and lateral-torsional buckling (LTB). In this study, a new connection detail was developed which uses a center gusset plate and horizontal stitches to prevent global lateral-torsional buckling of double-channel built-up sections, thereby enhancing rotational capacity. For deeper channel sections, web stiffeners can be used to separate WLB and FLB and thus minimize their interaction. Component testing was carried out on members with various sizes of double-channel sections, as well as a reduced beam section (RBS). The test results showed that the new detailing allows double-channel (C31) sections to achieve a member rotation of .9 rad (.65-rad moment frame story drift angle) with more than 8% of the nominal flexural strength. As a result, double-channel built-up sections are able to provide sufficient ductility to prevent the structures they support from deforming into a strength-degrading range under major earthquakes, which makes them a good candidate for STMFs and for potential use in other seismic force-resisting systems.
dc.publisherAmerican Society of Civil Engineers
dc.titleCyclic Behavior of Steel Double-Channel Built-Up Components with a New Lateral-Torsional-Buckling Prevention Detail
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002125
dc.page4018127
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record