Show simple item record

dc.contributor.authorWu Di;Yamazaki Yoshihiro;Sawada Sayoko;Sakata Hiroyasu
dc.date.accessioned2019-02-26T07:34:23Z
dc.date.available2019-02-26T07:34:23Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002115.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247990
dc.description.abstractIn 21, the Japanese government issued a law to promote the utilization of wood in public buildings. In response, the Architectural Institute of Japan presented several designs of large-scale wooden structures including a horizontal hybrid type. However, the seismic performance of the hybrid structure was not fully and thoroughly studied, especially in the absence of experimental evidence. Therefore, a series of shaking table tests were conducted in this paper. The specimens consisted of three 1/3-scale, 3-story, 3-bay, wooden horizontal hybrid structures with diverse shear wall distributions and diaphragm stiffness. The wood part was laterally connected to a relatively rigid steel frame at one end of the longitudinal direction and subjected to a series of artificial ground motions with peak ground accelerations (PGAs) from .1 to .8g. The paper introduces the detailed design and test procedure as well as the performances of the specimens. The proposed target drift–based design process was verified to be conservative in this experiment but feasible after modification. It was also found that the increase of diaphragm stiffness significantly improved the performance of the specimen and the concentrated shear walls at the side frame could provide sufficient lateral strength but was more vulnerable to strong seismic scenarios. On the other hand, the acceleration amplifications of the three specimens were higher than normal due to the conservative design and potential bullwhip effect.
dc.publisherAmerican Society of Civil Engineers
dc.titleShaking Table Tests on 1/3-Scale Model of Wooden Horizontal Hybrid Structure
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002115
dc.page4018123
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record