Show simple item record

dc.contributor.authorLoss Cristiano;Rossi Stefano;Tannert Thomas
dc.date.accessioned2019-02-26T07:34:19Z
dc.date.available2019-02-26T07:34:19Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002105.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247978
dc.description.abstractThe use of hybrid structural systems formed by combining wood with other materials provides engineers with a wide range of solutions to satisfy code requirements for mid- and possibly high-rise buildings. Hybrid wood-based systems include a wide range of construction methods and different levels of integration of materials and components. The research discussed in this paper presents an innovative hybrid timber-steel solution for floor diaphragms developed by joining cross-laminated timber panels with cold-formed customized steel beams. The repeatable floor unit is prefabricated off site and then fastened on site using preloaded bolts and self-tapping screws. The paper discusses the in-plane stiffness of the floor and the distribution of the horizontal loads to the shear walls. A numerical model was developed with its input parameters calibrated from full-scale experimental tests. The effects of connections and element arrangement, load and constraint conditions, the relative stiffness of shear walls and their spacing, as well as the floor aspect ratio on the load-displacement response of floors has been investigated. The findings allow engineers to find the fundamental design parameters and evaluate their role in the diaphragmatic behavior of floors. In particular, unfavorable layouts for the shear walls must be avoided in order to prevent an excessive in-plane deformation of the buildings.
dc.publisherAmerican Society of Civil Engineers
dc.titleIn-Plane Stiffness of Hybrid Steel–Cross-Laminated Timber Floor Diaphragms
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002105
dc.page4018128
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record