Show simple item record

dc.contributor.authorXue Huizhong;Gilbert Benoit P.;Guan Hong;Lu Xinzheng;Li Yi;Ma Fuhao;Tian Ying
dc.date.accessioned2019-02-26T07:34:08Z
dc.date.available2019-02-26T07:34:08Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002090.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247959
dc.description.abstractReinforced concrete (RC) flat-plate structures are vulnerable to punching shear failure at their slab-column connections, potentially leading to a catastrophic progressive collapse. In practice, the slab-column connection above an interior column, removed due to abnormal loads, may be subjected to a concentrated downward force because of the absence of the supporting column and further being pushed as a result of different live load intensities on individual stories. This force is different from the full design load that the column withstands in normal situations and, combined with the gravity load acting on the slab, may cause punching shear failure at the interior slab-column connection. This will further trigger failure propagation to the surrounding slab-column connections. This paper presents the experimental tests performed on two identical large-scale 2×2-bay RC flat-plate specimens under an interior column removal scenario. A 5-kPa uniformly distributed load was applied first to the slab followed by an incremental concentrated force imposed on the slab-column connection above the removed interior column. The complete collapse-resistant behavior and load redistribution pattern of the specimens were investigated and are reported herein. Results show that more than 9% of the applied concentrated force is solely distributed to the four nearest adjacent columns. Three load-carrying mechanism phases, in the form of flexural, tensile membrane, and a combination of one-way catenary and dowel actions can be distinguished in resisting the applied concentrated load.
dc.publisherAmerican Society of Civil Engineers
dc.titleLoad Transfer and Collapse Resistance of RC Flat Plates under Interior Column Removal Scenario
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002090
dc.page4018087
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record