Show simple item record

dc.contributor.authorMartínez Marcos;Atamturktur Sez;Ross Brandon;Thompson Jason
dc.date.accessioned2019-02-26T07:33:52Z
dc.date.available2019-02-26T07:33:52Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0002056.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247927
dc.description.abstractIn dry-stacked concrete masonry construction, units are laid without mortar, increasing the speed and reducing the cost of masonry installation. Despite these benefits, mortarless construction has not gained widespread acceptance as a viable alternative to traditional bonded masonry. This is largely attributed to the fact that the effect of surface roughness characteristics on the mechanical behavior of dry-stack masonry is not yet fully understood. To address this knowledge gap, the authors develop experimentally validated, predictive models that explicitly take the bed surface topography into account while representing the localized, nonlinear behavior at dry joints. With these validated models, a parametric analysis is completed to derive relationships between unit variables (e.g., material properties, surface roughness, and grout strength) and the performance of mortarless prisms under axial compressive loads. The derived relationships contribute to the knowledge base in terms of the behavior of dry-stacked masonry construction.
dc.publisherAmerican Society of Civil Engineers
dc.titleAssessing the Compressive Behavior of Dry-Stacked Concrete Masonry with Experimentally Informed Numerical Models
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002056
dc.page4018080
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record