Show simple item record

dc.contributor.authorMasoudnia Reza;Hashemi Ashkan;Quenneville Pierre
dc.date.accessioned2019-02-26T07:33:50Z
dc.date.available2019-02-26T07:33:50Z
dc.date.issued2018
dc.identifier.other%28ASCE%29ST.1943-541X.0001979.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247922
dc.description.abstractA timber composite beam consists of a cross-laminated timber (CLT) panel attached to a girder such as a laminated veneer lumber (LVL) beam. Under positive bending moment, part of the CLT panel acts as the flange of the LVL girder and resists compression. When the spacing between LVL girders becomes large, simple beam theory is not applicable because the compressive stresses in the flange vary with the distance from the LVL girder web, and the flange area over the web is more highly stressed than the extremities. This phenomenon is termed shear lag. For the design of steel-concrete composite sections, the effective flange width concept has been introduced into national and international design specifications. Despite the large number of studies regarding steel and concrete composite structures, comparative, comprehensive research has not been conducted on timber composite structures. In this study, a numerical model is developed and experimentally validated for analyzing different configurations of timber composite beams. Based on a parametric study, a formula is proposed for determining the effective flange width of timber composite beams.
dc.publisherAmerican Society of Civil Engineers
dc.titlePredicting the Effective Flange Width of a CLT Slab in Timber Composite Beams
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001979
dc.page4018084
dc.treeJournal of Structural Engineering:;2018:;Volume ( 144 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record