Show simple item record

dc.contributor.authorHow Tion Puay
dc.contributor.authorTakashi Hosoda
dc.date.accessioned2017-12-30T13:06:37Z
dc.date.available2017-12-30T13:06:37Z
dc.date.issued2016
dc.identifier.other%28ASCE%29GM.1943-5622.0000566.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4245736
dc.description.abstractThis study presents a mathematical model for the injection of Bingham fluid as common grout material into a horizontal slot formed between parallel plates. The proposed model consisted of a grout reservoir model, a slot model, and an intermediate model that bridged the former two models. The authors showed that it is necessary to include a grout reservoir model in the injection model to avoid singularity of velocity when the grout penetration length is zero. This approach also allowed investigation of the initial stage flow condition during the injection process, especially at the inlet of the slot. Based on the proposed model, the approximate solution for the grout penetration length at the initial stage of injection was also derived. The performance of the proposed model was compared against a well-established model under laminar flow condition.
dc.publisherAmerican Society of Civil Engineers
dc.titleMathematical Modeling of the Injection of Grout into a Horizontal Slot
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue4
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000566
dc.page06015011
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record