Show simple item record

dc.contributor.authorDebarghya Chakraborty
dc.contributor.authorYatam Mahesh
dc.date.accessioned2017-12-30T13:06:12Z
dc.date.available2017-12-30T13:06:12Z
dc.date.issued2016
dc.identifier.other%28ASCE%29GM.1943-5622.0000553.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4245636
dc.description.abstractBy using the lower-bound finite-element limit-analysis technique, the bearing capacity of a strip footing placed over an embankment was determined with the incorporation of pseudostatic horizontal seismic body forces. The variation of the bearing capacity factors Nc, Nq, and Nγ were calculated as the function of the friction angle of soil ϕ, slope angle β, horizontal seismic acceleration coefficient kh, and setback distance S. On the basis of the magnitude of ϕ, the S values were varied from 0B to 15B. From the results, it can be understood that the bearing capacity factors decrease with the increase in β and kh. With the increase in ϕ and S, the bearing capacity factors were found to increase. After a particular setback distance, the effect of the embankment slopes was found to be negligible. Failure patterns were also studied.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Bearing Capacity Factors for Strip Footings on an Embankment by Using Lower-Bound Limit Analysis
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000553
dc.page06015008
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record