Show simple item record

dc.contributor.authorBei Bing Dai
dc.contributor.authorJun Yang
dc.contributor.authorCui Ying Zhou
dc.date.accessioned2017-12-30T13:05:02Z
dc.date.available2017-12-30T13:05:02Z
dc.date.issued2016
dc.identifier.other%28ASCE%29GM.1943-5622.0000520.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4245447
dc.description.abstractThis paper presents an experimental study on the shear behavior of granular materials, focusing on the effects of interparticle friction and particle size, which are of fundamental importance but are not yet well understood. The experimental program consisted of a large number of direct shear tests on glass beads of varying sizes and interparticle friction conditions, performed under a range of packing densities and normal stress levels. Test data were interpreted in terms of the stress–dilatancy relationship and shear strength parameters. The study indicates that under otherwise similar testing conditions, oil-lubricated glass beads tend to have substantially lower shear strength as compared with water-lubricated, water-flooded, and dry glass beads. It has also been found that at similar particle size uniformity, increasing mean particle size (d50) leads to more dilatant shear response and higher shear strength. A generalized stress–dilatancy relation is proposed, which introduces a variable dilatancy coefficient that reflects on the effects of interparticle friction and particle size. It is shown that classical stress–dilatancy relations can be regarded as special cases of this generalized case, with the dilatancy coefficient being taken as a constant. Further explanations for the observed effects on macroscopic behavior are provided from the micromechanics perspectives.
dc.publisherAmerican Society of Civil Engineers
dc.titleObserved Effects of Interparticle Friction and Particle Size on Shear Behavior of Granular Materials
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000520
dc.page04015011
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record