Show simple item record

dc.contributor.authorZahra Aghazadeh Ardebili
dc.contributor.authorM. A. Gabr
dc.contributor.authorM. S. Rahman
dc.date.accessioned2017-12-30T13:04:55Z
dc.date.available2017-12-30T13:04:55Z
dc.date.issued2016
dc.identifier.other%28ASCE%29GM.1943-5622.0000518.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4245425
dc.description.abstractEvaluation of the uplift capacity of plate anchors in saturated clay is an important aspect in the design of offshore foundation systems of various structures. In most of the literature reviewed, simple constitutive models such as Tresca or Mohr–Coulomb (MC) have been used in evaluating the plates’ pullout capacity. There exists a need to study the pullout capacity of anchors using other advanced soil models and explore differences in computed behavior. In addition to the MC model, two other constitutive models are used herein to represent the soil behavior. These are Modified Cam-Clay and Soft Soil models. A series of finite-element analyses are performed using the three constitutive models. Undrained effective stress analyses are conducted to study the response of both strip and circular plate anchors in saturated soils. The capacities of plate anchors are assessed through the application of the displacement control approach. The effective stress parameters are correlated with the undrained shear strength, and Nc (dimensionless breakout factor) values from the three constitutive models are presented and compared with the lower bound solution, as well as with the data obtained from similar studies and experimental data available in the literature. Differences resulting from the characteristics of the three constitutive models are examined and discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleUplift Capacity of Plate Anchors in Saturated Clays: Analyses with Different Constitutive Models
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000518
dc.page04015053
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record