• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Experimental and Analytical Investigation of Crack Spacing and Width for Overlaid RC Beams at Elevated Temperatures

    Thumbnail
    View/Open
    %28ASCE%29ST.1943-541X.0001910.pdf (1.693Mb)
    Date
    2017
    Author
    Dawei Zhang
    Khuram Rashid
    Bo Wang
    Tamon Ueda
    Metadata
    Show full item record
    Abstract
    Cracking in overlay-strengthened RC structures significantly influences their structural performance; however, the effect of elevated temperatures on cracking behavior remains unclear. This work summarizes the experimental and analytical investigations of flexural crack spacing and crack widths of overlaid reinforced concrete (RC) beams at elevated temperatures. Flexural crack spacing was observed experimentally by conducting four-point bending tests on control RC beams and beams overlaid by polymer cement mortar (PCM) together with steel reinforcements at 20, 40, and 60°C during both exposure and loading. The flexural crack width was measured during testing at 20 and 40°C. The flexural crack spacing and crack width increased with increasing temperature for the same reinforcement ratio in the overlay, whereas the flexural crack spacing and crack width decreased with increasing total area of steel reinforcements in the overlay at the same temperature. Based on the existing models for predicting the average crack spacing of overlaid beams, the bond deterioration of concrete/steel and PCM/steel bonds was incorporated to predict the flexural crack spacing of overlaid beams at elevated temperatures. The flexural crack width at an elevated temperature was predicted by incorporating the flexural crack spacing and the tensile stress of tension reinforcements in both the substrate beam and overlay at the cracked section. Close agreement was obtained between the experimental and predicted values of the flexural crack spacing and width.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4244585
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV