Show simple item record

dc.contributor.authorO. Ozgur Egilmez
dc.contributor.authorMustafa Vardaroglu
dc.contributor.authorAndac Akbaba
dc.date.accessioned2017-12-30T13:01:07Z
dc.date.available2017-12-30T13:01:07Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001706.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244566
dc.description.abstractLight-gauge metal sheeting is often used in steel building and bridge industries as concrete deck formwork. Besides providing support to the fresh concrete, the sheeting acts as a shear diaphragm and provides continuous lateral bracing to the top flanges of the beams to which they are attached. An adequate stability-bracing system must possess sufficient stiffness and strength to control deformations and brace forces. Strength requirements for shear diaphragms are currently not well established. A computational study was conducted to develop strength requirements for shear diaphragms bracing simply supported steel beams. Both end-fastener and sidelap-fastener connections were modeled in the study. To the best of the authors’ knowledge, this is the first study to quantify the stability-induced forces in sidelap fasteners. The effects of deck width and number of end and sidelap fasteners on brace forces were investigated. Expressions were developed to estimate the stability-induced brace forces in end-fastener and sidelap-fastener connections.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrength Requirements for Shear Diaphragms Used for Stability Bracing of Steel Beams
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001706
dc.page04016214
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record