Show simple item record

dc.contributor.authorChristian Viau
dc.contributor.authorGhasan Doudak
dc.date.accessioned2017-12-30T13:01:04Z
dc.date.available2017-12-30T13:01:04Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001622.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244555
dc.description.abstractAn understanding of the behavior of wood stud walls in a region corresponding to hazardous-blowout damage levels is currently lacking. The focus of the current study is on investigating the flexural response of full-scale wood stud walls subjected to pressure-impulse combinations that would yield severe damage levels. Static material properties were determined and used as input in an analytical model that considers the nonlinear behavior of stud-to-sheathing joints, as well as high strain-rate effects. Experimental results showed that premature sheathing failure could occur prior to full flexural stud response, and that sheathing panel debris could be generated. The use of thicker sheathing and screws shifted the failures to the studs, while decreasing the amount of debris. Welded wire mesh was successfully used as a reinforcement of the sheathing or as a catcher system while maintaining the residual axial capacity of the studs. A single-degree-of-freedom material-predictive model was successfully validated using the experimental test results.
dc.publisherAmerican Society of Civil Engineers
dc.titleInvestigating the Behavior of Light-Frame Wood Stud Walls Subjected to Severe Blast Loading
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001622
dc.page04016138
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record