Show simple item record

dc.contributor.authorLisa Choe
dc.contributor.authorAnil Agarwal
dc.contributor.authorAmit H. Varma
dc.date.accessioned2017-12-30T13:00:56Z
dc.date.available2017-12-30T13:00:56Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001500.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244525
dc.description.abstractThis paper presents the behavior of axially loaded steel columns subjected to thermal gradients through their cross sections. Experimental tests were conducted on full-scale wide-flange steel columns with W8×35 and W14×53 sections made from standard grade 50 steel. The experimental investigations confirmed that variations in fire protection thickness had significant influence on the thermal gradient developing through the steel cross section. Thermal gradient along the flanges caused bowing of column specimens toward the hotter side. Thermal bowing introduced second-order moments and adversely affected stability, leading to failure of column specimens by inelastic flexural column buckling. The experimental behavior and results were compared with those obtained from detailed nonlinear finite-element analyses of the tested specimens. These nonlinear finite-element models utilized standard (temperature-dependent) material properties, and reasonably predicted the axial load-temperature-deformation behavior and failure temperature of column specimens subjected to nonuniform heating.
dc.publisherAmerican Society of Civil Engineers
dc.titleSteel Columns Subjected to Thermal Gradients from Fire Loading: Experimental Evaluation
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001500
dc.page04016037
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record