Show simple item record

dc.contributor.authorJia-Lin Ma
dc.contributor.authorTak-Ming Chan
dc.contributor.authorBen Young
dc.date.accessioned2017-12-30T13:00:45Z
dc.date.available2017-12-30T13:00:45Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001456.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244489
dc.description.abstractThis paper presents the experimental investigation on the compressive behavior of cold-formed high-strength steel tubular stub columns. In this paper, the nominal 0.2% proof stress of the high-strength steel was 700, 900, and 1,100 MPa. A total of 25 stub column tests on circular, rectangular, and square hollow structural sections were conducted. Geometric imperfections and load-deformation histories were reported and assessed. The experimental results were compared against the design values calculated from the Australian, European, and North American codes, and the corresponding compactness criteria were assessed. A finite-element model, which incorporated the varying material properties, was described, and the influence of geometric and material imperfections was also evaluated. The finite-element results successfully captured the experimental observations and can be adopted for future parametric studies.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation on Stub-Column Behavior of Cold-Formed High-Strength Steel Tubular Sections
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue5
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001456
dc.page04015174
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record