Show simple item record

dc.contributor.authorThangarajah Janaraj
dc.contributor.authorManicka Dhanasekar
dc.date.accessioned2017-12-30T13:00:28Z
dc.date.available2017-12-30T13:00:28Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001403.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244436
dc.description.abstractIn-plane shear capacity formulation of reinforced masonry is commonly conceived as the sum of the capacities of three parameters, viz, the masonry, the reinforcement, and the precompression. The term “masonry” incorporates the aspect ratio of the wall without any regard to the aspect ratio of the panels inscribed (and hence confined) by the vertical and the horizontal reinforced grout cores. This paper proposes design expressions in which the aspect ratio of such panels is explicitly included. For this purpose, the grouted confining cores are regarded as a grid of confining elements within which the panels are positioned. These confined masonry panels are then considered as building blocks for multi-bay, multi-storied confined masonry shear walls and analyzed using an experimentally validated macroscopic finite-element model. Results of the analyzes of 161 confined masonry walls containing panels of height to length ratio less than 1.0 have been regressed to formulate design expressions. These expressions have been first validated using independent test data sets and then compared with the existing equations in some selected international design standards. The concept of including the unreinforced masonry panel aspect ratio as an additional term in the design expression for partially grouted/confined masonry shear walls is recommended based on the conclusions from this paper.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign Expressions for the In-Plane Shear Capacity of Confined Masonry Shear Walls Containing Squat Panels
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001403
dc.page04015127
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record