Show simple item record

dc.contributor.authorChao Dou
dc.contributor.authorYong-Lin Pi
dc.date.accessioned2017-12-30T13:00:19Z
dc.date.available2017-12-30T13:00:19Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001373.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244411
dc.description.abstractThis paper presents the flexural-torsional buckling resistance and design of steel circular arches subjected to uniform compression with elastic end bending restraints by using finite element (FE) numerical analyses. Firstly, effects of geometric and mechanical parameters such as initial imperfections, section types, material properties, slenderness, rise-to-span ratios, and end restraints on flexural-torsional buckling resistances of arches are investigated and are found to be eliminated to a large extent by introducing the normalized slenderness. Then, on the basis of extensive numerical results, a design method is proposed to predict the flexural-torsional buckling resistances of circular arches in uniform compression with elastic end restraints by the column curves according to the normalized slenderness and a specific section type, namely curve ‘a’ for hollow sections, curve ‘b’ for welded box sections, and curve ‘c’ for welded I-sections. Next, the flexural stiffness of an arch is studied, taking the destabilizing effect of the axial force into account to calculate the end restraining provided by adjacent arch segments to the adverse segment in a laterally-braced arch in uniform compression to obtain the flexural-torsional buckling resistance using the normalized slenderness and the column curve analytically. The result shows a good agreement with that gained from finite element numerical analyses, and proves it very conservative when the adverse segment is assumed to be hinged without any end restraining.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural-Torsional Buckling Resistance Design of Circular Arches with Elastic End Restraints
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001373
dc.page04015104
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record