Show simple item record

dc.contributor.authorCatherine A. Whyte
dc.contributor.authorKevin R. Mackie
dc.contributor.authorBozidar Stojadinovic
dc.date.accessioned2017-12-30T13:00:10Z
dc.date.available2017-12-30T13:00:10Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001346.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4244386
dc.description.abstractA new thermomechanical hybrid simulation method is proposed that extends the mechanical hybrid simulation method by including thermal degrees of freedom and temperature loads. The thermomechanical hybrid simulation method was implemented in the OpenSees and OpenFresco frameworks. Modifications to enable this new capability centered on incorporating the temperature degrees of freedom in the hybrid model domain, and on developing new OpenFresco objects and a test execution strategy to simultaneously control the structural elements of the experimental setup, the thermal loads, and the mechanical loads. The implementation of the thermomechanical method at the ETH Zürich IBK Structural Testing Laboratory was verified and validated using a simple two-element hybrid model. The responses of the model to a force ramp, applied to the full structure, and a scaled version of the ISO 834 standard fire curve, applied to the experimental element, were obtained in two simulations—one conducted using an explicit and the other using an implicit integration scheme. The tests yield very similar results, and both simulations closely match the theoretical solution.
dc.publisherAmerican Society of Civil Engineers
dc.titleHybrid Simulation of Thermomechanical Structural Response
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001346
dc.page04015107
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record