Show simple item record

dc.contributor.authorMingjing Jiang
dc.contributor.authorJun Sima
dc.contributor.authorYujun Cui
dc.contributor.authorHaijun Hu
dc.contributor.authorChuangbing Zhou
dc.contributor.authorHuayang Lei
dc.date.accessioned2017-12-30T12:56:56Z
dc.date.available2017-12-30T12:56:56Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000972.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4243791
dc.description.abstractNatural loess with large voids and weakly bonded structures is widespread in the arid areas of the world, particularly northwestern China. Recent experimental studies have shown that the mechanical behavior of natural loess is stress path dependent. In practice, soils influenced by the construction of earthen structures may undergo various complex stress paths that are very different from the conventional stress paths commonly considered in geolaboratory experiments. Because of the limitations of current technologies, real stress paths are difficult to obtain from field tests or physical modeling. This study focused on the deformation behavior of natural loess from Jingyang, China, under the stress paths around a shield tunnel. First, the stress paths around a shield tunnel were determined from the numerical data obtained at different positions in a distinct-element simulation of shield tunnel excavation in sand (for simplicity) and by using a novel method referred to as the equivalent stress ratio method. Second, a set of undrained triaxial tests were conducted using the conventional and complex stress paths. The experimental results demonstrate that the deformation characteristics of the loess are different at different positions around the shield tunnel, and the largest deformation appears in the lateral zone (0°). This indicates that the lateral zone is the key zone to be controlled during shield tunneling. In addition, the relationship between the stress increments and the strain increments varies with the stress path. In a complete unloading path, the behavior of natural loess is largely elastic and linear. On the contrary, in a complete loading path or semiloading path, the behavior is largely inelastic and nonlinear, and this behavior is associated with the stress state and recent stress history. These results are valuable in establishing the constitutive relationships for natural loess under complex stress paths and may be useful for the construction of shield tunnels in loess areas.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation of the Deformation Characteristics of Natural Loess under the Stress Paths in Shield Tunnel Excavation
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000972
dc.page04017079
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record