Show simple item record

dc.contributor.authorRaju Acharya
dc.contributor.authorJie Han
dc.contributor.authorRobert L. Parsons
dc.date.accessioned2017-12-30T12:55:56Z
dc.date.available2017-12-30T12:55:56Z
dc.date.issued2016
dc.identifier.other%28ASCE%29GM.1943-5622.0000652.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4243546
dc.description.abstractThis paper presents a numerical study on culverts under rigid pavements subjected to static traffic loading. The numerical study was based on the results of a comprehensive field study of a single-cell low-fill box culvert under three roadway sections (concrete pavement, concrete shoulder, and unsurfaced fill). The culvert in the field test was instrumented with displacement transducers and pressure cells to capture the deformations and pressures resulting from different combinations of wheel loads from a test truck pulling a low-boy trailer loaded with a backhoe. Deflections under the culvert roof and pressures on the culvert were measured during loading. Properties of soil and pavement layers were determined in the laboratory. A three-dimensional (3D) numerical model of the culvert was developed using a finite-difference program. The numerical model with material properties was verified with the field test results. A parametric study was conducted to investigate the influence of cement concrete pavement thickness, fill depth, and culvert span on the load distributions over the culvert under wheel loads. The intensity of the vertical pressure gradually decreased with an increase in the pavement thickness, fill depth, and culvert span. However, the effect of the span on vertical pressures decreased with a top slab designed to control excessive deflections. The comparison of the calculated vertical pressures by the numerical method and the AASHTO distribution methods demonstrated that the current AASHTO pressure distribution methods are overly conservative for the wheel load distribution on a low-fill box culvert under a rigid pavement.
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical Analysis of Low-Fill Box Culvert under Rigid Pavement Subjected to Static Traffic Loading
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000652
dc.page04016016
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record