• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Engineering Mechanics
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Engineering Mechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Poroelastic Dual-Porosity Dual-Permeability Simulation of Pressure Transmission Test on Chemically Active Shale

    Thumbnail
    View/Open
    %28ASCE%29EM.1943-7889.0001210.pdf (1.816Mb)
    Date
    2017
    Author
    Chao Liu
    Son K. Hoang
    Minh H. Tran
    Younane N. Abousleiman
    Russell T. Ewy
    Metadata
    Show full item record
    Abstract
    This paper presents the poroelastic dual-porosity dual-permeability analytical solutions simulating the pressure transmission test on chemically active shale, taking into account shale anisotropy and electrokinetic effects. Laboratory data from pressure transmission tests on a shale sample with high clay content were also simulated by using both single-porosity and dual-porosity dual-permeability analytical solutions. The matching provides estimates of crucial shale parameters, including hydraulic permeabilities, membrane coefficient, ions diffusion coefficients, and electroosmotic permeability. The matches between analytical solutions and laboratory data included not only pore pressure, which had been the focus of previous studies, but also axial strain. Such double matches provided additional confidence in the estimations compared with conventional simulations of only pore-pressure measurements. It was found that the single-porosity simulation could not match pore pressure and axial strain simultaneously. In particular, if all measured properties were honored, the simulation yielded higher pore-pressure and lower axial strain predictions than laboratory data. To obtain a good match in both pore pressure and axial strain by using the single-porosity simulation, some parameters such as Young’s moduli and cation exchange capacity (CEC) had to be changed substantially from measured values. Therefore, it was postulated that most of the volume change occurred within the clay grains and in between the clay layers, which cannot be captured by the single-porosity model. This hypothesis was further supported by the fact that the dual-porosity dual-permeability simulation was able to model the pressure transmission test very well for both pore pressure and axial strain. Sensitivity analysis was also conducted to identify parameters with the most influence on the outcomes of the pressure transmission test. This paper highlights the importance of accounting for shale dual-porosity dual-permeability and chemically active natures when simulating shale responses.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4243145
    Collections
    • Journal of Engineering Mechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV