Show simple item record

dc.contributor.authorEve Walkden
dc.contributor.authorAlan Bloodworth
dc.date.accessioned2017-12-30T12:54:03Z
dc.date.available2017-12-30T12:54:03Z
dc.date.issued2017
dc.identifier.other%28ASCE%29EM.1943-7889.0001177.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4243126
dc.description.abstractUnderstanding the mechanical behavior of fresh cut timber, in which the natural moisture content has been retained, has application in predicting the behavior of living tree elements such as branch/stem joints, potentially inspiring structural designs through biomimicry. This project develops a process of strain imaging using particle image velocimetry to analyze behavior of timber samples freshly cut from oak tree joints and tested in tension. The timber surface was not coated so the fiber response could be visualized directly. Load was applied in steps and different methods for comparing images were trialled, including a sequential method in which strain is accumulated progressively from image to image and a first-to-last comparison. Sample flexibility caused significant deformation in the camera field of view, and so the analysis methodology was modified so that each image was compared sequentially with the first with the target area in the image for strain calculation expanded as the test proceeded. This resulted in strain contour plots able to show the impending failure of the component as the tension is applied.
dc.publisherAmerican Society of Civil Engineers
dc.titleVisualization of Fresh Cut Timber Deformation by Photogrammetry
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)EM.1943-7889.0001177
dc.page04016123
dc.treeJournal of Engineering Mechanics:;2017:;Volume ( 143 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record