Show simple item record

dc.contributor.authorSamah Ben Ayed
dc.contributor.authorSaad A. Ragab
dc.contributor.authorMuhammad R. Hajj
dc.date.accessioned2017-12-30T12:53:36Z
dc.date.available2017-12-30T12:53:36Z
dc.date.issued2016
dc.identifier.other%28ASCE%29EM.1943-7889.0000973.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4243017
dc.description.abstractActive flow control is applied at different locations over a surface-mounted prism to reduce extreme pressure coefficient and loads. Different control strategies including blowing, suction, and synthetic jets are evaluated. The full unsteady Navier–Stokes equations are solved to determine the pressure coefficients. The extent of reduction when using these three strategies with different flux injections, slot locations, and angles is determined. These strategies are assessed in two flow regimes corresponding to different Reynolds numbers. It is found that for the case of R = 103, a reduction of the peak pressure, by nearly 50% is obtained. For the case of R = 104, the best reduction is about 25%.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlow Control of Extreme Pressure Loads Associated with Flow Separation
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)EM.1943-7889.0000973
dc.page04015068
dc.treeJournal of Engineering Mechanics:;2016:;Volume ( 142 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record