Show simple item record

dc.contributor.authorLi
dc.contributor.authorWeihong;Shi
dc.contributor.authorWei;Li
dc.contributor.authorXueying;Ren
dc.contributor.authorJing;Jiang
dc.contributor.authorHongde
dc.date.accessioned2017-12-30T11:43:04Z
dc.date.available2017-12-30T11:43:04Z
dc.date.copyright8/9/2017 12:00:00 AM
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_12_122201.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242710
dc.description.abstractThe effects of hole length-to-diameter ratio and compound angle on flat plate film cooling effectiveness are investigated from an experimental and numerical view. Film cooling effectiveness measurements are performed for seven blowing ratios (M) ranging from 0.3 to 2, five-hole length-to-diameter ratios (L/D) from 0.5 to 5, and two compound angles (β: 0 deg and 45 deg) using pressure-sensitive paint (PSP) technique. Results indicate that discrete holes with L = 0.5 and 1 show highest film cooling effectiveness regardless of compound angle. Round hole generally shows an increasing trend as L increases from 2 to 5, while compound angle hole shows a complex trend concerning with blowing ratios (BRs) and length-to-diameter ratios. Compound angle enhances film cooling effectiveness with high blowing ratios and length-to-diameter ratios. In a parallel effort, large eddy simulation (LES) approach is employed to solve the flow field and visualize vortex structures of intube and mainstream regions. It is demonstrated that the counter-rotating vortex pair (CRVP) which is observed in the time-averaged flow field is originated in different vortex structures with varying blowing ratios and length-to-diameter ratios. Scalar field transportation features are also investigated to clarify how different vortex structures affect the temperature distribution and the film cooling effectiveness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Flow Structures and Adiabatic Film Effectiveness for Simple and Compound Angle Hole With Varied Length-to-Diameter Ratio by Large Eddy Simulation and Pressure-Sensitive Paint Techniques
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4037085
dc.journal.fristpage122201
dc.journal.lastpage122201-13
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record