Show simple item record

dc.contributor.authorMayooran Sivapathasundaram
dc.contributor.authorMahen Mahendran
dc.date.accessioned2017-12-16T09:24:44Z
dc.date.available2017-12-16T09:24:44Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001740.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242681
dc.description.abstractExtensive damage to light gauge steel roofing systems caused by high wind events such as cyclones and storms has been a concern to the communities living in cyclone/storm prone areas over many years. In recent times, pull-through failures of roof battens occurring in their bottom flange to rafter or truss connection have become the main reason for severe roof failures. Therefore, a detailed experimental study was first undertaken using full-scale and small-scale tests to investigate the pull-through failures of roof battens subject to high wind uplift loads. However, since experimental tests can be expensive and time consuming, the ability to successfully use numerical models is imperative. Hence a detailed numerical study was undertaken by developing suitable finite-element models with the inclusion of a suitable failure criterion to predict the initiation of critical pull-through failures of roof battens that are associated with a tearing fracture around the screw fastener head edge. The overall load versus deformation behavior, ultimate failure loads, and failure modes were compared with the experimental results to validate the developed finite-element models. The ability of the validated finite-element models to accurately predict the pull-through failure loads of roof battens for other cases was evaluated by comparing relevant experimental results. This paper presents the details of this numerical study and the results.
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical Modeling of Thin-Walled Steel Roof Battens Subject to Pull-Through Failures
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001740
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record