Show simple item record

dc.contributor.authorMd Shahnewaz
dc.contributor.authorM. Shahidul Islam
dc.contributor.authorMoein Ahmadipour
dc.contributor.authorThomas Tannert
dc.contributor.authorM. Shahria Alam
dc.date.accessioned2017-12-16T09:24:42Z
dc.date.available2017-12-16T09:24:42Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001747.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242673
dc.description.abstractPrefabricated wood I-joists with web openings are commonly used in light-frame wood construction. The capacity and the failure pattern of such I-joists in the presence of a circular web opening were experimentally investigated on 100 specimens with various sizes and locations of web openings and two different span lengths of 3.66 m (12 ft) and 6.10 m (20 ft). The control I-joists, i.e., I-joists without any opening, failed in flexure in the midspan, whereas most of the I-joists with an opening failed in a brittle and sudden shear mode. The presence of an opening reduced the capacity up to 54% compared to I-joists without web openings depending on the size and location of the opening. Subsequently, to prevent brittle failure and improve capacity, the I-joists were reinforced using two perpendicular OSB collar layers with a variation in the reinforcement length. The effectiveness of reinforcing the web around openings was investigated on another 100 specimens. After reinforcement, brittle premature failure of I-joists was prevented with an increase in capacity up to 27% compared to the I-joists with openings. Analytical models to calculate the capacity of unreinforced and reinforced I-joists with openings are proposed, validated with results from previous research, which prove to be more accurate compared to existing models from the literature.
dc.publisherAmerican Society of Civil Engineers
dc.titleReinforced Wood I-Joists with Web Openings
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001747
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record