Show simple item record

dc.contributor.authorChang-Soo Kim
dc.contributor.authorHong-Gun Park
dc.contributor.authorHo-Jun Lee
dc.contributor.authorIn-Rak Choi
dc.contributor.authorKyung-Soo Chung
dc.date.accessioned2017-12-16T09:24:31Z
dc.date.available2017-12-16T09:24:31Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001803.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242612
dc.description.abstractComposite columns of various sectional configurations are studied to maximize the contribution of high-strength steel under compression-flexural loading. For concrete-encased steel (CES) columns, steel angles were placed at four corners of the cross-section and connected by various types of transverse reinforcements. In the case of a concrete-filled steel tube (CFT) column, a slender steel tube was stiffened by welding longitudinal bars. To verify structural capacities, eccentric axial load tests were performed for three concrete-encased steel angle (CES-A) columns and a stiffened concrete-filled slender steel tube (S-CFT) column, using Grade 800 MPa steel and 100 MPa concrete. The CES-A columns showed good structural performance in strength, flexural stiffness, and ductility due to the high contribution and good confinement effect of the corner steel angles and transverse reinforcement. In the S-CFT column the welded longitudinal bars successfully restrained local buckling of the slender steel tube so that the full plastic strength of the composite section developed.
dc.publisherAmerican Society of Civil Engineers
dc.titleEccentric Axial Load Test for High-Strength Composite Columns of Various Sectional Configurations
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001803
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record