Show simple item record

dc.contributor.authorAta Babazadeh
dc.contributor.authorRigoberto Burgueño
dc.contributor.authorPedro F. Silva
dc.date.accessioned2017-12-16T09:24:22Z
dc.date.available2017-12-16T09:24:22Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001856.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242558
dc.description.abstractThis paper presents a nonlinear inelastic solution for the length of the critical plastic region in the case of nonlinear moment profiles along RC bridge columns. A new analytical expression for the length of the plastic region capturing the combined effects that column slenderness, second-order P-δ moments, and the reduced postyield flexural stiffness have on the spread of plasticity over the column length is proposed. Variable flexural stiffness along the column height was also considered. Experimental results from three slender RC bridge columns with aspect ratios (shear span to diameter) greater than 10 were used to verify the analytical solution. Moreover, the results from the proposed solution were compared against previous models and it was found that the presented nonlinear inelastic solution offers better performance over linear and nonlinear elastic solutions for predicting the length of the plastic region and how it is affected by geometric nonlinearities and P-δ moments.
dc.publisherAmerican Society of Civil Engineers
dc.titleModel for the Plastic Region in Slender RC Columns with Nonlinear Moment and Stiffness Profiles
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001856
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record