Show simple item record

dc.contributor.authorDaniel J. Borello
dc.contributor.authorLarry A. Fahnestock
dc.date.accessioned2017-12-16T09:24:21Z
dc.date.available2017-12-16T09:24:21Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001861.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242554
dc.description.abstractThe steel-plate shear wall with coupling (SPSW-WC) system is a natural extension of the conventional steel-plate shear wall (SPSW) seismic force–resisting system. The SPSW-WC configuration is created by linking a pair of SPSW piers together with coupling beams at the floor levels. Two half-scale, three-story specimens were tested using hybrid controls to simulate the bottom three stories of six-story prototype structures. The experimental SPSW-WC specimens demonstrated robust cyclic performance. Both specimens reached 4% lateral drift, the maximum displacement that could be imposed by the facility, with minimal strength degradation. Additionally, a large amount of energy was dissipated during each test, with over 20% equivalent viscous damping observed in the 4% drift cycles. The web plates, horizontal boundary elements, and coupling beams all exhibited ductile response through large inelastic deformations. The SPSW-WC configuration was shown to be a viable seismic lateral force resisting system for use in high seismic regions.
dc.publisherAmerican Society of Civil Engineers
dc.titleLarge-Scale Cyclic Testing of Steel-Plate Shear Walls with Coupling
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001861
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record