Show simple item record

dc.contributor.authorMiloš Petrović
dc.contributor.authorBožidar Stojadinović
dc.contributor.authorNebojša Mojsilović
dc.date.accessioned2017-12-16T09:24:14Z
dc.date.available2017-12-16T09:24:14Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001884.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4242531
dc.description.abstractIn order to extend the latest findings on the in-plane shear behavior of rectangular unreinforced masonry (URM) wallettes with soft-layer bed joints and gain insight into the possible influence of flanges, two series of static-cyclic shear tests on I-shaped (flanged) URM wallettes have been conducted. The wallettes were made of standard Swiss clay blocks and standard cement mortar including a rubber granulate soft layer placed in the bottom bed joint. The test results show that the flanges considerably increased the horizontal force resistance and the initial stiffness of the I-shaped wallettes compared to rectangular wallettes. Further, it appeared that the presence of a soft layer can provide for significant seismic response modification by reducing the initial stiffness and significantly increasing the displacement capacity of the I-shaped wallettes. An analytical model based on discontinuous stress fields is proposed to predict the horizontal force resistance of the I-shaped wallettes with soft-layer bed joints.
dc.publisherAmerican Society of Civil Engineers
dc.titleI-Shaped Unreinforced Masonry Wallettes with a Soft-Layer Bed Joint: Behavior under Static-Cyclic Shear
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001884
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record