Show simple item record

dc.contributor.authorS. M. Hasanur Rahman
dc.contributor.authorKaram Mahmoud
dc.contributor.authorEhab El-Salakawy
dc.date.accessioned2017-12-16T09:20:47Z
dc.date.available2017-12-16T09:20:47Z
dc.date.issued2017
dc.identifier.other%28ASCE%29CC.1943-5614.0000740.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4241649
dc.description.abstractIn this paper, test results of six large-scale glass fiber–reinforced polymer (GFRP) RC continuous T-beams are presented. The test specimens include one steel RC beam to serve as reference, one GFRP RC beam designed to meet the serviceability criteria at the service load level calculated for the reference beam, and four GFRP RC beams designed to achieve the same theoretical ultimate load of the reference beam. The test variables included the assumed percentage of moment redistribution, the spacing of lateral reinforcement in flange, and the arrangement of shear reinforcement. The test results showed that moment redistribution from the hogging to the sagging moment region occurred in GFRP RC beams with T-sections and that a small spacing of stirrups enhanced the moment redistribution percentage. In addition, decreasing the spacing of lateral reinforcement in the flange improved the moment redistribution through enhancing the stiffness of the sagging moment region.
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Glass Fiber–Reinforced Polymer Reinforced Concrete Continuous T-Beams
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000740
dc.treeJournal of Composites for Construction:;2017:;Volume ( 021 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record