Show simple item record

dc.contributor.authorSyed Naqvi
dc.contributor.authorEhab El-Salakawy
dc.date.accessioned2017-12-16T09:20:40Z
dc.date.available2017-12-16T09:20:40Z
dc.date.issued2017
dc.identifier.other%28ASCE%29CC.1943-5614.0000777.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4241627
dc.description.abstractThis paper presents the experimental results of five full-scale glass fiber–reinforced polymer (GFRP) reinforced concrete (RC) columns with lap splices under axial and cyclic-reversed loads. One additional reference column was reinforced with steel bars and stirrups for comparison purposes. The column specimens had a 350-mm square cross section with 1,650-mm shear span. Each specimen represented the lower segment of a first-story column between the footing and the point of contraflexure. The test parameters included type of reinforcement, lap splice length of longitudinal reinforcement and transverse reinforcement spacing. Test results indicated that a splice length of 60 times the diameter of the longitudinal column bar was adequate in transferring the full bond forces along the splice length. In addition, lap-spliced GFRP-RC columns with closely spaced transverse reinforcement showed stable hysteresis response and achieved high levels of deformability, which far exceeded the limitations of the North American building codes.
dc.publisherAmerican Society of Civil Engineers
dc.titleLap Splice in GFRP-RC Rectangular Columns Subjected to Cyclic-Reversed Loads
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000777
dc.treeJournal of Composites for Construction:;2017:;Volume ( 021 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record