Show simple item record

dc.contributor.authorElijah Courtney
dc.contributor.authorAmy C. Courtney
dc.contributor.authorLubov P. Andrusiv
dc.contributor.authorMichael W. Courtney
dc.date.accessioned2017-12-16T09:15:18Z
dc.date.available2017-12-16T09:15:18Z
dc.date.issued2017
dc.identifier.other%28ASCE%29EM.1943-7889.0001202.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4240554
dc.description.abstractPrevious work has shown that the acoustic-impedance model does not accurately predict blast wave transmission through plates of 10 different materials in air. In this work, results are presented for experimental tests of predictions of the acoustic-impedance model for blast wave transmission through the same 10 materials under water. Underwater blasts were created in a laboratory, and peak blast pressures were measured at symmetric locations: one where the blast wave travelled through the material and another where the blast wave reached the high-speed pressure sensor directly through the water. The acoustic-impedance model did not accurately predict underwater blast wave transmission, with a root-mean-square error (RMSE) of 22% in predicted transmission ratios and a correlation of r = 0.69 between predicted and measured transmissions. Measured transmission ratios were better described by a linear model based on material density, with an RMSE under 5% and a correlation of r = 0.97.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Test of the Acoustic-Impedance Model for Underwater Blast Wave Transmission through Plate Materials
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)EM.1943-7889.0001202
dc.treeJournal of Engineering Mechanics:;2017:;Volume ( 143 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record