• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Performance of Axially Loaded-Piled Retaining Wall: Experimental and Numerical Analysis

    Thumbnail
    View/Open
    %28ASCE%29GM.1943-5622.0000710.pdf (2.981Mb)
    Date
    2017
    Author
    W. R. Azzam
    A. Z. Elwakil
    Metadata
    Show full item record
    Abstract
    The piled wall has other applications in addition to supporting the excavation, such as use as part of the permanent work/foundation. It also can be used to reduce or eliminate the need for a separate foundation by carrying all or a portion of the superstructure loads, especially in urban areas. In this study, the potential benefits of using a piled retaining wall to resist the axial load were investigated. A series of plane-strain small-scale model tests on a piled retaining wall embedded in sand under axial loads was performed in the laboratory. The influence of the penetration depth, pile stiffness, and sand relative density on both ultimate axial capacity and deformation behavior of the piled system was evaluated. The results indicate that the ultimate axial capacity of the tested piled wall was remarkably increased with the increase of both penetration depth and soil relative density. When the soil relative density was varied from 50 to 88%, ultimate axial piled wall capacity increased by 72% for the piled wall system installed with a penetration depth of three times the free height and high stiffness. The ultimate axial capacity of the piled wall had a significant effect on the maximum horizontal deformation at failure, in the range of 0.14% of the total piled wall height. Numerical analysis showed that the existence of surcharge stress in the active zone behind the axially loaded-piled wall substantially reduced the ultimate axial capacity of the piled wall by 50%, with remarkable increase in lateral wall deformation and maximum bending moment.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4240131
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV