Show simple item record

dc.contributor.authorMohammad Rezania
dc.contributor.authorMohaddeseh Mousavi Nezhad
dc.contributor.authorHossein Zanganeh
dc.contributor.authorJorge Castro
dc.contributor.authorNallathamby Sivasithamparam
dc.date.accessioned2017-12-16T09:13:05Z
dc.date.available2017-12-16T09:13:05Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000774.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4240064
dc.description.abstractThis paper reports the results of a numerical investigation of the behavior of a natural soft clay deposit under the installation of a case study pile. The case study problem included installation of an instrumented close-ended displacement pile in a soft marine clay deposit, known as Bothkennar clay, in Scotland. The site has been used for a number of years as a geotechnical test bed site, and the clay has been comprehensively characterized with both in situ tests and laboratory experiments. The soft soil behavior, both after pile installation and subsequent consolidation, was reproduced by using an advanced critical-state-based constitutive model that accounts for the anisotropy of soil fabric and destructuration effects during plastic straining. Furthermore, a time-dependent extension of the model was used to study soil creep and the significance of its consideration in the overall pile-installation effects. The simulation results were compared against field measurements; furthermore, for comparison, the pile installation was also analyzed using the well-known isotropic modified Cam-clay model to highlight the importance of considering inherent features of natural soil, such as anisotropy and structure, in the simulations. A series of sensitivity analyses was also performed to evaluate the influence of initial anisotropy and bonding values on simulation results and to check the reliability of the numerical analyses.
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling Pile Setup in Natural Clay Deposit Considering Soil Anisotropy, Structure, and Creep Effects: Case Study
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000774
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record