• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Analysis of Laterally Loaded Pile Groups in Improved Soft Clay

    Thumbnail
    View/Open
    %28ASCE%29GM.1943-5622.0000795.pdf (1.185Mb)
    Date
    2017
    Author
    Amirata Taghavi
    Kanthasamy K. Muraleetharan
    Metadata
    Show full item record
    Abstract
    The use of p-multipliers in the analysis of the lateral loading behavior of pile groups is based on the concept of modifying the single-pile p-y curve to obtain the p-y curve for a pile in a group. The p-multipliers account for the reduced soil resistance mobilized at a given deflection as a result of overlapping of shear zones. Different factors can influence the p-multipliers; however, because of the lack of experimental data, most researchers and design guidelines consider only the normalized pile spacing in the direction of loading in their recommendations. In this study, the effects of pile spacing and clay stiffness on the p-multipliers were investigated using the results of two series of centrifuge tests. The soil profile consisted of four lightly overconsolidated clay layers overlying a dense sand layer. The pile groups had a symmetrical layout consisting of 2 × 2 piles spaced at center-to-center distances of 3.0 and 7.0 pile diameter (D) and were driven into improved (stiff clay) and unimproved soft clay. Ground improvement was done in situ using simulated cement deep soil mixing (CDSM). Computer analyses were performed to back-calculate the p-multipliers. There was very good agreement between the measured and computed responses for both the leading and trailing rows of piles in the unimproved and improved soft clay. The results reveal that increasing the clay stiffness and pile spacing in the direction of loading increase p-multipliers. No pile–soil–pile interaction was observed for the 7D spacing. The proposed set of p-multipliers for the soft clay was found to be in close agreement with some current guidelines, whereas other design guidelines appear to recommend relatively conservative values of p-multipliers for both soft and stiff clay (improved ground).
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4240043
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV