Show simple item record

dc.contributor.authorR. Ganesh
dc.contributor.authorSunil Khuntia
dc.contributor.authorJagdish Prasad Sahoo
dc.date.accessioned2017-12-16T09:12:57Z
dc.date.available2017-12-16T09:12:57Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000799.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4240038
dc.description.abstractAn empirical nondimensional reduction factor is proposed in this paper, which can be used for determining the ultimate bearing capacity of eccentrically and/or obliquely loaded shallow strip foundations embedded in sand. This was developed after analyzing a series of laboratory model test results available in the literature on strip foundations. The depth of foundation (D), eccentricity of load (e), and inclination of load (α)varied from 0 to 1B, 0 to 0.5B, and 0 to 20°, respectively, where B refers to the width of foundation. The proposed reduction factor was found to provide reasonably well results for calculating the ultimate bearing capacity of shallow strip foundation under eccentric and/or inclined loads. The results obtained by using the proposed method have been found to be in good agreement with widely used traditional methods available in the literature.
dc.publisherAmerican Society of Civil Engineers
dc.titleBearing Capacity of Shallow Strip Foundations in Sand under Eccentric and Oblique Loads
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue4
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000799
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record