Show simple item record

dc.contributor.authorChong Tang
dc.contributor.authorKok-Kwang Phoon
dc.contributor.authorLei Zhang
dc.contributor.authorDian-Qing Li
dc.date.accessioned2017-12-16T09:12:26Z
dc.date.available2017-12-16T09:12:26Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000898.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4239935
dc.description.abstractIn this paper, 62 centrifuge tests are collected from the literature and used to perform a statistical evaluation of the model factor for conventional methods to calculate the bearing capacity of dense sand overlying clay. The model factor is defined as a ratio of measured capacity to calculated capacity. The variations of the model factor with input parameters are established as regression equations based on the results of finite-element limit analysis (FELA). Conventional methods that multiply by regression equations are shown to be more accurate on average for all data sets. Further verification exercise from 27 additional centrifuge tests indicates the modified method could also be applicable for medium dense sand overlying clay. The mean and coefficient of variation of the model factor for the modified methods are finally characterized as a lognormal random variable with a mean of 1.06 and coefficient of variation of 0.17.
dc.publisherAmerican Society of Civil Engineers
dc.titleModel Uncertainty for Predicting the Bearing Capacity of Sand Overlying Clay
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000898
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record