Show simple item record

dc.contributor.authorSamaneh Amirpour Harehdasht
dc.contributor.authorMourad Karray
dc.contributor.authorMahmoud N. Hussien
dc.contributor.authorMohamed Chekired
dc.date.accessioned2017-12-16T09:12:10Z
dc.date.available2017-12-16T09:12:10Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000951.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4239876
dc.description.abstractThis paper examines the potential influence of particle-size distribution on stress-dilatancy behavior of granular materials from the results of 35 conventional drained triaxial compression tests. Seven different grain-size distribution curves of two different materials (glass beads and Péribonka sand) in the range of 63–2,000 µm were tested at different normal pressures and initial relative densities. It was shown that for a given relative density and confining pressure, although shear strength and volumetric response of the tested materials were independent of the coefficient of uniformity, Cu, in the investigated range, they were significantly influenced by the variation of the mean particle size, D50. On the basis of the triaxial test results, a correlation between the material constant α of a modified stress-dilatancy equation and D50 of the tested materials was found. In addition, the coefficient of an equation, which was introduced as an experimental adjustment of the well-known stress-dilatancy equation, were fine-tuned to account for D50. A comparison of the predictions by the proposed empirical formulas with stress-dilatancy data from the literature and a micromechanical explanation of the experimental results are also provided.
dc.publisherAmerican Society of Civil Engineers
dc.titleInfluence of Particle Size and Gradation on the Stress-Dilatancy Behavior of Granular Materials during Drained Triaxial Compression
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000951
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record