Show simple item record

dc.contributor.authorRajni Saggu
dc.contributor.authorTanusree Chakraborty
dc.date.accessioned2017-12-16T09:12:06Z
dc.date.available2017-12-16T09:12:06Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000962.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4239865
dc.description.abstractResponse of geothermal energy piles in sand under combined thermal and mechanical loading was investigated in the present work using a nonlinear axisymmetric finite-element (FE) analysis procedure. In this study, the piles were considered to behave linear-elastically. The stress-strain behavior of sand was simulated using a state parameter–based constitutive clay-and-sand model (CASM), which was implemented in FE software through a user material subroutine. The geothermal energy piles of different lengths and diameters with floating and end-bearing conditions in sand were analyzed under mechanical and thermomechanical loading to study the displacements of soil and pile through axial and radial strains in the pile and axial stress in the pile. In addition, parametric sensitivity studies were carried out by varying the relative density of sand and thermal load on the pile. Results showed that the relative density of the sand, applied thermal load on the pile, and the end condition of the pile govern the relative displacement between pile and soil. Also, axial stresses under thermomechanical loading were greater than they were under only mechanical loading.
dc.publisherAmerican Society of Civil Engineers
dc.titleThermomechanical Analysis and Parametric Study of Geothermal Energy Piles in Sand
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000962
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record