Show simple item record

dc.contributor.authorVishwas N. Khatri
dc.contributor.authorJyant Kumar
dc.contributor.authorShamim Akhtar
dc.date.accessioned2017-12-16T09:12:02Z
dc.date.available2017-12-16T09:12:02Z
dc.date.issued2017
dc.identifier.other%28ASCE%29GM.1943-5622.0000980.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4239849
dc.description.abstractThe lower- and upper-bound finite-element limit analysis in conjunction with second-order conic programming (SOCP) was used to estimate the ultimate bearing capacity of strip and circular footings with an inclusion of a layer of dense sand over existing loose sand strata. The analysis followed the Mohr-Coulomb yield criterion and an associated flow rule. The results are expressed in terms of an efficiency factor that increases quite significantly with increases in the (1) thickness and (2) friction angle of the upper densified layer. While keeping the same thickness of the upper dense sand layer, the circular footing exhibits greater efficiency-factor values as compared to strip footing. The numerical results compare well with data available from the literature.
dc.publisherAmerican Society of Civil Engineers
dc.titleBearing Capacity of Foundations with Inclusion of Dense Sand Layer over Loose Sand Strata
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue10
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000980
dc.treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record